The Drum Pump Store

Plastic siphon drum pumps heavy duty priced for 50 pump order

Plastic siphon drum pumps heavy duty priced for 50 pump order Plastic siphon drum pumps heavy duty priced for 50 pump order. Plastic Siphon Drum Pump should be used in liquids with a maximum fluid temperature of 140 degrees F or 60 degrees C. The Maximum viscosity of the fluid to be transferred by the plastic siphon drum pump is 500 SSU. like 85 W Gear Lube. Plastic Siphon Drum Pumps wetted parts are polyethylene with a maximum flow rate of 7 Gallons Per Minute. Plastic Siphon Drum Pumps mount into the 2 inch Male NPT opening of most 55 gallon drums or drums with a bung adapter. Plastic Siphon Drum Pumps work in smaller drums 15 gallon 30 gallon to 35 gallon drums just cut suction tube at a angle to fit to bottom of the drum of your choice. Plastic Siphon Drum Pumps have a suction tube with inside diameter of .675 inch and outside diameter of .75 inch and the length of the suction tube is 34 inch that can be cut for shorter drums or containers. The plastic siphon drum pump has a discharge hose that is .9375 inch inside diameter and the outside diameter is 1.0625 inch and the length of the hose is 48 inches. Plastic Siphon Drum Pumps have a red cap air vent that controls siphoning. Plastic Siphon Pumps will pump to higher levels and siphons to lower levels. Open red air vent cap to stop siphoning. Quick action pump easily fills or empties kerosene light oils gasoline mild acids mild alkaline soaps detergents and various water based solvents. Discounts for 50 plastic siphon drum pumps or larger orders. These plastic siphon drum pumps are priced for 50 pump purchase.
In Stock
Price: $450.00
Powered by Interchange

Portions copyright 2002-2020 Interchange Development Group, freely redistributable under GPL